某“W”型锅炉炉效低的综合治理

针对某锅炉经济性差的问题，从设备、运行及自动控制等方面分析，并进行了相应整改。影响炉效的主要因素有煤质恶化、灰渣含碳量高、排烟温度高和CO浓度高等，同时炉膛燃烧不稳定也是影响燃烧效率的重要因素。通过漏风整改、制粉系统优化、燃烧优化调整和控制系统优化等方法有效提高了锅炉经济性。研究表明：分析锅炉经济性降低的影响因素时应抓住主要因素，兼顾其他，科学的生产管理是保证锅炉运行经济性的重要基础；入炉煤质恶化是最主要的外在因素；良好的自动控制系统能有效稳定燃烧参数，提高燃烧效率；降低飞灰含碳量的主要工作应集中在制粉系统优化调整；完整而系统的燃烧调整试验能够保证锅炉运行控制参数的科学合理，并需要正确调整氮氧化物排放和锅炉效率之间的关系。     

中国碳排放强度的时空演进及跃迁机制

面对气候变化所带来的生存危机以及环境治理的复杂状况,对中国碳排放强度时空演进的动态监测与预警治理的研究是实现碳排放强度下降目标的关键。文章测算1997—2015年中国大陆30个省区碳排放强度的空间面板数据,采用探索性时空数据分析(ESTDA)方法对中国碳排放强度的空间相关性、集聚特征及其时空跃迁进行空间统计分析,借助分位数回归与时空跃迁嵌套模型,揭示在时间和空间推移的双重作用下中国各省区碳排放强度的时空跃迁机制。研究结果表明:(1)中国30个省区的碳排放强度在时空分布上并不是完全随机状态,各个省区碳排放强度之间具有显著的空间相关性特征,碳排放强度的变动趋势会受到其相临近省区碳排放强度的影响,省域间的碳排放强度在空间分布上呈现"集聚"与"分异"并存的时空演进特征。(2)中国碳排放强度空间集聚趋势增强,具有高度的凝固性和较低的流动性,10个高碳排放强度省区碳排放强度的稳定性将成为制约中国碳排放强度整体跃迁的重点省区,相关省区的跃迁性将成为驱动中国碳排放强度整体跃迁的关键省区。(3)各省区的碳排放强度空间集聚过程中存在时空跃迁的驱动模式和制约模式,分位数回归模型能够很好地解释各驱动因素对碳排放强度时空跃迁的驱动机制,不同响应阶段的驱动因素的分位数与碳排放强度时空跃迁类型之间具有很强的嵌套性。(4)根据各省区碳排放强度时空演进及其跃迁机制的分析结果,进一步提出加强对关键省区碳排放强度的有效监测与治理,加大碳排放的约束力度等差异化的碳减排调控措施。     

基于卫星夜间灯光数据的中国分省碳排放时空模拟

中国能源统计数据"横向不可比,纵向不可加"现象依然突出,尤其是分省能源消费统计千差万别,给分省碳排放评估带来了较大困难,如何利用卫星遥感数据科学合理地估算中国分省碳排放是当前亟须研究的问题。本文运用DMSP/OLS全球稳定夜间灯光数据,在通过相互校正、年内融合和年际间校正等系列处理得到中国分省稳定夜间灯光数据的基础上,首先分别构建中国分省稳定夜间灯光亮度DN值与人均碳排放和单位面积碳排放之间的时空地理加权回归模型,两个模型整体效果均较好,拟合优度分别高达96.74%和99.24%;其次运用稳定夜间灯光亮度DN值对分省人均碳排放和单位面积碳排放进行时空模拟;最后运用人口规模和土地面积对分省碳排放进行估算。估算结果显示:(1)整体来看,2000—2013年年均碳排放模拟值与实际值6.3349×109t较为接近,两个模型的相对误差均在0.5%以内。(2)分年度来看,所有年份的相对误差均在5%以内,2006年分省加总碳排放模拟值与实际碳排放6.2036×109t最为接近,绝对误差和相对误差均较小,两个模型模拟值的相对误差均为0.04%。(3)分省域来看,2000—2013年年均碳排放模拟值与实际碳排放均非常接近,除海南和宁夏外,其余28个省区市的相对误差均在1%以内。(4)分年度分省域来看,以2013年为例,40%省份的相对误差在2%以内,70%省份的相对误差在5%以内。从整体、分年度、分省域、分年度分省域的估算结果来看,基于稳定夜间灯光数据的中国分省碳排放时空模拟效果良好。因此,运用卫星夜间灯光数据可以较为准确地对中国分省碳排放进行估算和预测,为卫星遥感影像数据服务分省碳排放监测和评估提供一种补充性参考。     

Carbon dioxide emissions from cities in China based on high resolution emission gridded data

Based on the China high resolution emission gridded data (1 km spatial resolution), this article is aimed to create a Chinese city carbon dioxide (CO₂) emission data set using consolidated data sources as well as normalized and standardized data processing methods. Standard methods were used to calculate city CO₂ emissions, including scope 1 and scope 2. Cities with higher CO₂ emissions are mostly in north, northeast, and eastern coastal areas. Cities with lower CO₂ emissions are in the western region. Cites with higher CO₂ emissions are clustered in the Jing-Jin-Ji Region (such as Beijing, Tianjin, and Tangshan), and the Yangtze River Delta region (such as Shanghai and Suzhou). The city per capita CO₂ emission is larger in the north than the south. There are obvious aggregations of cities with high per capita CO₂ emission in the north. Four cities among the top 10 per capita emissions (Erdos, Wuhai, Shizuishan, and Yinchuan) cluster in the main coal production areas of northern China. This indicates the significant impact of coal resources endowment on city industry and CO₂ emissions. The majority (77%) of cities have annual CO₂ emissions below 50 million tons. The mean annual emission, among all cities, is 37 million tons. Emissions from service-based cities, which include the smallest number of cities, are the highest. Industrial cities are the largest category and the emission distribution from these cities is close to the normal distribution. Emissions and degree of dispersion, in the other cities (excluding industrial cities and service-based cities), are in the lowest level. Per capita CO₂ emissions in these cities are generally below 20 t/person (89%) with a mean value of 11 t/person. The distribution interval of per capita CO₂ emission within industrial cities is the largest among the three city categories. This indicates greater differences among per capita CO₂ emissions of industrial cities. The distribution interval of per capita CO₂ emission of other cities is the lowest, indicating smaller differences of per capita CO₂ emissions among this city category. Three policy suggestions are proposed: first, city CO₂ emission inventory data in China should be increased, especially for prefecture level cities. Second, city responsibility for emission reduction, and partitioning the national goal should be established, using a bottom-up approach based on specific CO₂ emission levels and potential for emission reductions in each city. Third, comparative and benchmarking research on city CO₂ emissions should be conducted, and a Top Runner system of city CO₂ emission reduction should be established.     

我国林业碳汇市场供需研究——以广东长隆碳汇造林项目为例

广东长隆碳汇造林项目作为我国首个获得国家发展和改革委员会签发的林业温室气体自愿减排(CCER)项目,对于我国林业碳汇参与应对气候变化具有重要的示范意义。本文对广东长隆碳汇造林项目进行了成本收益分析,发现林业碳汇交易价格被远远低估,从而使该项目不具备经济上的可复制性。为探究交易价格被低估的原因,本文考察了林业碳汇市场的供需关系,发现目前碳交易市场对林业碳汇CCER需求不足仅是表象,供需错配才是实质。首先,从需求侧来看,广东省碳排放配额设置过于宽松,缺乏林业碳汇CCER的接纳能力;其次,就供给侧而言,CCER的交易成本很高,且项目申报要求业主为企业法人,这严重限制了林业碳汇CCER的有效供给。鉴于以上问题,本文提出应同时从林业碳汇CCER的需求侧和供给侧着手改革。就需求侧而言,收紧广东省碳排放配额总量,并将林业碳汇CCER交易由补充机制改为配额管理。就供给侧而言,可以结合广东省推进林业碳普惠制度,将项目申报主体和交易主体放宽到独立法人和个人,广泛吸收民间资本、培育大型林业企业开展碳汇造林项目;降低碳汇项目进入门槛,根据省情制定方法学,简化签批手续。     

Robust technology policy against emission leakage: The case of upstream subsidies

Asymmetric regulation of a global pollutant between countries can alter the competitiveness of industries and lead to emissions leakage, which hampers countries’ welfare. In order to limit leakage, governments consider supporting domestic trade-exposed firms by subsidizing their investments in abatement technology. The suppliers of such technologies tend to be less than perfectly competitive, particularly when both emissions regulations and advanced technologies are new. In this context of twin market failures, we consider the relative effects and desirability of subsidies for abatement technology. We find a more robust recommendation for upstream subsidies than for downstream subsidies. Downstream subsidies tend to increase global abatement technology prices, reduce pollution abatement abroad and increase emission leakage. On the contrary, upstream subsidies reduce abatement technology prices, and hence also emissions leakage.     

蚯蚓生态滤池中蚯蚓与植物对污水净化的作用评估

构建具有不同蚯蚓和植物配置的4个单级蚯蚓生态滤池,依次编号为A(无蚯蚓无植物)、B(有蚯蚓无植物)、C(有蚯蚓栽种芦苇)和D(有蚯蚓栽种水生鸢尾)。通过比较4个滤池在6个月实验期间对化学需氧量(COD)和总氮(TN)的去除效率,系统分析蚯蚓和植物对滤池去除污染物的影响。实验分2个阶段进行:5月上旬至9月上旬,滤池进水碳氮比恒定为6;9月中旬至11月中旬,滤池每周进水碳氮比交替为3、6、9。研究结果表明,蚯蚓对滤池去除COD有一定的促进作用,且作用强度显著受到进水碳氮比的影响。植物的存在与种类对滤池去除COD效率没有显著影响。蚯蚓和植物对滤池的TN去除效率都没有显著影响。滤池进水的碳氮比是显著影响滤池去除TN效率的主要因素。     

A study on the factor market distortion and the carbon emission scale effect of two-way FDI

Based on the data of 30 Chinese provinces for the period from 2004 to 2015, this paper expounds the carbon emissions effect of two-way foreign direct investment (FDI) from the perspective of scale effect and factor market distortions. This study uses Kaya identity to decompose carbon emission and construct simultaneous equations model to empirically examine the factor market distortion and the carbon emission scale effect of two-way FDI. The results show that the inward foreign direct investment (IFDI) increase regional carbon emission through scale effect and also exacerbates factor market distortion in China, whereas the outward FDI trends reduce carbon emission and reduces factor market distortions in China. The study also shows that human capital, research and development (R&D), trade openness, and capital accumulation are important determinants of two-way FDI. Therefore, the study proposes that IFDI policies should focus on acquiring green technologies. In addition, the domestic enterprises should be encouraged to participate in global business.     

复合链式结构下中国林业碳库系统测度模型构建

温室气体上升导致的全球气候变暖问题不容忽视,增加森林碳汇和木质林产品碳储是缓解温室效应的有效途径。根据森林碳汇功能与林产品碳储功能的关联理论与模型,推导和改进包括森林子碳库、土壤子碳库及木质林产品子碳库在内的林业碳库核算模型及方法,以实现目标碳从森林碳库向木质林产品碳库的过渡与转移。基于气候变化背景下森林-林产品产业链的发展现状,构建包括森林子碳库和林产品子碳库的复合一体化林业碳库模型,使之为中国林业碳库的计量与评价提供判据。首先,对包含森林子碳库和木质林产品子碳库在内的世界林业碳库的发展现状进行探讨,归纳和比较国内外主流的关联林业碳库评估方法模型,从而对中国林业碳库模型的构建提供理论背景支持和逻辑方法支撑。其次,分析现有中国林业碳库评估存在的优势和弊端,找出适合中国林业特点的国家碳库创新评估路径,运用政府间气候变化专门委员会指定的生产法的思路,通过分析目标碳在林产品产业链生产、加工等过程中的流入和支出,提出创新中国林业碳库的模型构想并对其系统内涵进行分析。最后,赋予中国林业碳库系统模型数学表达,分析其数理结构并进行逻辑演绎,在森林子碳库和木质林产品子碳库两个复合链式体系下构建中国林业碳库系统测度模型(ForestProducts Carbon Model/FPCM)。     

An analysis of end-of-life terminology in the carbon fiber reinforced plastic industry

While many studies and reviews into the practices conducted by industry and academia to recycle and remanufacture carbon fibre-reinforced plastic (CFRP) exist, to date no investigation exists which regards the correctness of the use of the terms recycling and remanufacturing. As such, this paper seeks to analyse the CFRP reuse industry’s attempt to recycle and remanufacture manufacturing waste CFRP and end-of-life (EOL) CFRP with an emphasis on the terminology used to describe these practices. Firstly, this paper presents a justification of the importance of using EOL terminology correctly; outlining the benefits and problems associated with using the correct and incorrect terminology. This paper finds that in the case of CFRP remanufacturing, terminology is being applied incorrectly and in the case of CFRP recycling, particular care should be taken when applying the term recycled to CFRP or stating that CFRP has been recycled. Further, this paper proposes new terminology (in keeping with EU directives) which could be adopted by industry and academia working in this area. This paper also finds that in the case of remanufacture, CFRP is incapable of being remanufactured.